Header Mobile Logo

Henchman
55 Pendlebury Road
Cardiff, NSW 2285
AUSTRALIA

Tel: +61 2 4956 7111
Fax: +61 2 4956 7811
Email: sales@henchman.com.au
Web: https://www.henchman.com.au/

Henchman Email Banner Logo
Knipex 78 71 125 Electronic Super Knips Flush Cutter black 125mm with Lead Catch

Knipex 78 71 125 Electronic Super Knips Flush Cutter black 125mm with Lead Catch

Product Code: 78 71 125

$AUD 67.09 (inc GST)
($AUD 61.00 ex GST)

Lead time about 4 weeks

 


  • Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics
  • Ground, very sharp cutting edges without bevel
  • Shear cut with controlled micro cutting edge misalignment for the most precise cutting of even the thinnest of wires and for a long service life
  • Precision shaped tips cut wires resting on a board from 0.2 mm dia.
  • Joint with stainless steel rivet
  • Cutting edges additionally induction hardened
  • Extremely smooth movement for minimum operator fatigue
  • With opening spring and opening limiter

    • Cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC
    • Special tool steel, burnished
    • With lead catcher - no uncontrolled loss of cut wire ends
    • Knipex Tools finest German quality pliers at attractive pricing.

 Specifications

  • Length: 125 mm
  • Capacity (Soft Wire): 0,2 - 1,6 Ø mm
  • Capacity (Med/Hard Wire): 1,2 Ø mm
  • Weight: 57 g
  • 4003773043799

Category: Knipex Electronic Side Cutters

Brand: Knipex



Knipex 78 71 125 Electronic Super Knips Flush Cutter black 125mm with Lead Catch

Product Code: 78 71 125

Category: Pliers / Electronic Side Cutters / Knipex Electronic Side Cutters

Price: $AUD 67.09 (inc GST)

Brand: Knipex

Description:
  • Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics
  • Ground, very sharp cutting edges without bevel
  • Shear cut with controlled micro cutting edge misalignment for the most precise cutting of even the thinnest of wires and for a long service life
  • Precision shaped tips cut wires resting on a board from 0.2 mm dia.
  • Joint with stainless steel rivet
  • Cutting edges additionally induction hardened
  • Extremely smooth movement for minimum operator fatigue
  • With opening spring and opening limiter

    • Cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC
    • Special tool steel, burnished
    • With lead catcher - no uncontrolled loss of cut wire ends
    • Knipex Tools finest German quality pliers at attractive pricing.