Fluke 88-5/A KIT Automotive Meter Combination Kit

Fluke 88V/A Deluxe Automote Multimeter Combo Kit New features for maximum productivity
• Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
• Magnetic hanger (included with kit) for easy set-up and viewing while freeing your hands for other tasks
• Peak min/max to capture intermittent events as short as 250 micro seconds
• Large digit display with bright, two-level backlight makes the Fluke 88V significantly easier to read than the old Fluke 88 Features
• Lifetime warranty
• 6000 counts, 3-3/4 digits
• Measure up to 1000 V ac and dc
• Measure up to 10 A, 20 A for up to 30 seconds
• Built in thermometer lets you carry one less tool (temperature probe included)
• Frequency to 200 kHz and % duty cycle
• Resistance, continuity
• RPM measurements with inductive pickup
• Millisecond pulse width measurements for fuel injectors
• Magnet hanger to attach meter to the vehicle and free your hands for other tasks
• 10,000 µF capacitance range for components and motor caps
• Min/Max-Average recording with Min/Max Alert to capture variations automatically
• Peak capture to record transients as fast as 250 µs
• Relative mode to remove test lead interference from low ohms measurements
• Auto and manual ranging for maximum flexibility
• Touch Hold to capture stable readings avoiding noisy signals
• Large display digits and two-level bright white backlight for increased visibility
• Analog bargraph for fast changing or unstable signals
• Input Alert provides audible warning against wrong use of input jacks
• Improved selectable sleep mode for long battery life
• Access door for fast battery changes without opening up the case
• Classic” design with new removable holster with built in test lead and probe storage
• 10 meg ohm input impedance wont load circuits
• 0.1 % dc accuracy Position the meter in the most usable location with the magnetic hanger. The holster on the new Fluke 88V accepts a small but extremely powerful magnet (Fluke Tpak) that holds the meter firmly to most steel surfaces. This allows you to focus on taking measurements instead of holding the meter in your hand. Electrical safety All inputs are protected to Category III, 1000 V and Category IV 600 V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges Kit Contains:
• Fluke 88V Automotive Multimeter
• TL224 1.5 m long heat resistant silicone test leads
• TP220 Removeable test probes to pierce corroded terminals
• AC285 SureGrip Large Jaw Alligator Clip Set
• TPAK Magnetic hanger to position and hold meter to steel surfaces
• 80BK Temperature probe
• RPM80 Inductive RPM pick-up probe
• C800 Hard carrying case
• 2 Automotive Backprobe pins
• Insulation Piercing Probe