Gage Bilt GB704SH Split Riveter with 8 Foot Hose

The GB704SH series are pneumatic-hydraulic installation tools designed specifically for the efficient installation of blind fasteners. They can be operated in any position. They have a rated pull load of 3,300 lbs. (14.68 kN) with 90 psi (6.2 bar) air pressure at the air inlet.

The GB704SH and GB704SR installation tools offer a unique "split" system providing the operator with an ergonomic tool with reduced hand held weight. The handle and head cylinder assembly when held in hand weighs 2.0 lbs. (.90 kg).

The GB704SH series installation tools operate on 90 to 100 psi (6.2-6.9 bar) of air pressure, with 90 psi. (6.2 bar) providing the maximum efficiency. At 90 psi (6.2 bar) of air pressure, the GB704SH-5 series does not exceed 81.5 dB(A) and consumes .30 SCF/cycle (8.50 L/cycle).

GB704SH - Split Riveter with 8 Foot Hose

GB704SH-5 - Split Riveter with 5 Foot Hose

SPECIFICATIONS:

• Hand Held Weight - 2.00 lbs. (.90 kg)
• Air pressure req'd - 90-100 p.s.i. (6.2-6.7 bar)
• Air consumption - 30 SCF/cycle (8.50 L/cycle)
• Hydraulic oil - Automatic Transmission Oil, Dexron® III, or equivalent
• Setting stroke - .600" (15.24 mm)
• Rated pull load - 3,300 lbs. (14.68 kN)
• Noise level - Less than 81.5 dB(A)
• Vibration - Tested - No Hazards Found