Gage Bilt GB704SR-8 Split Riveter 8 Foot Hose

The GB704 series are pneumatic-hydraulic installation tools, designed specifically for the efficient installation of blind rivets. They can be operated in any position and have a rated pull load of 3,300 (14.68 kN) pounds with 90 psi (6.2 bar) air pressure at the air inlet.

The GB704SH and GB704SR riveters offer a unique ”split” system providing the operator with an ergonomic tool with reduced hand held weight.

GB704SR-8 - Split Riveter with 8 Foot Hose

The GB704SR-8 is a pneumatic-hydraulic split handle installation tool designed specifically for the efficient installation of blind fasteners. This tool's unique ”split” system provides the operator with a lightweight ergonomic tool. The handle and head cylinder assembly when held in hand weighs 1.5 lbs. (.68 kg). The entire split handle installation tool weighs 6.5 lbs. (2.95 kg). It has a .540 inch (13.72 mm) fastener setting stroke.

The GB704SR-8 split handle installation tool operates on 90 to 100 psi. (6.2-6.9 bar) of air pressure, with 90 psi. (6.2 bar) providing maximum efficiency. At 90 psi. (6.2 bar) of air pressure, the GB704SR does not exceed 81.5 dB(A) and consumes .16 SCF/cycle (4.53 L/cycle).

The GB704SR-8 comes with 8 feet (2.4 m) of hose. Hoses are attached to the rear of the manifold-head assembly. Vacuum systems are available for this tool, please consult our engineering department for specific applications.

SPECIFICATIONS:

• Hand Held Weight - 1.50 lbs. (.68 kg)
• Air pressure req'd - 90-100 p.s.i. (6.2-6.9 bar)
• Air consumption - .16 SCF/cycle (4.53 L/cycle)
• Hydraulic oil - Automatic Transmission Oil, Dexron® III, or equivalent
• Setting stroke - .540'' (15.24 mm)
• Rated pull load - 3,300 lbs. (14.68 kN)
• Noise level - Less than 81.5 dB(A)
• Vibration - Tested - No Hazards Found