Hakko FR-702 Rework System Dual Port

Hakko FR-702 Dual Port Rework System

Features:

• Powerful rework station that contains every function needed for rework
• Safer and more secure rework operation
• With upgrade of all the applications
• 4-in-1 unit for space saving
• Compatible with N2 system by purchasing N2 iron (FX-8802) as an optional accessory

Hakko FR-702 Dual Port Rework System Contents: Station, Soldering iron (FX-8801), Desoldering gun (FR-4103), Iron holder for soldering gun (with cleaning wire), Iron holder for desoldering iron (with cleaning sponge, cleaning wire), Cleaning pin for 1.0 mm, Cleaning pin for heater, Cleaning drill for 1.0 mm, Nozzle wrench, 2x Filter, 4x Ceramic paper filter, Handpiece holder for hot air, Pad 2x each 3mm, 5mm, 7.6mm), Heat resistant pad, Vacuum Pipe Control Knob (L with screw), 2x Color band, Power cord, manual

Hakko FR-702 Dual Port Rework System Features

• 4 Port Rework Station with 140 W desoldering gun, M-type soldering iron and 670W hot air handles various soldering, desoldering and reworking by choosing proper handpieces from a selection of 7 types.
• Other than the standard handpieces of 140 W desoldering gun, M-type soldering iron and high power & large volume hot air, there are 4 more applications. Consumed tip nozzle and heating element can be replaced individually, and running cost is much lower than the composite type.
• High-power Desoldering gun HAKKO FR-4103 increases the power to 140W from 50W of our previous models (HAKKO 474, 475), it can make it easy to desolder on multi-layer, which was never an easy job, and it can also shorten the process time. A wide selection of nozzle, with the addition of new types, is available for a variety of desoldering works. Long type nozzles for narrow space. Oval shape nozzles for flat terminals. SS type nozzles for micro land-patterns.
• Soldering iron HAKKO FX-8801/FX-8805: Thermal conductivity has been increased by reviewing external configuration and internal struction of 900 tip series. Now T18 and T19 tip series are selectable depending on work environment.
• Hot air handpiece: 670W high power and large volume hot air improves work efficiency.
• N2 soldering iron HAKKO FX-8802: The N2 gas runs into the nozzle assembly and covers over the soldering tip. It prevents the soldering tip and the heater from being readily oxidized and performs great role as a preheating. Two effects of N2 system, preventing oxidation or preheating effect, can improve soldering defects such as bridging, protrusion icicle, insufficient solder filling in PTH, etc. T18 tips series are compatible with this application.
• One-hand Manual-solder-feed iron HAKKO FX-8803: Solder and feed with one hand. Feed a set amount of solder with one hand. Manual feed system is perfect for cellular manufacturing. Soldering work can be conducted at the pace of the operator. T18 tips series are compatible with this application.
• SMD Hot Tweezer HAKKO FX-8804: Direct heating - less influence upon surrounding components on crowded boards. Easily removes SMD chips and flat packages up to 25mm. The collet allows easy replacement and alignment of the tips.