Proto JH4-250 Torque Wrench Electronic Interchangeable Head 25-250 in-lbs

Proto 1/4 inch Drive Electronic Interchangeable Head Torque Wrench Assembly 25-250 FT-LBS - H4 tang.

Features:

• Full interface with Proto® Interchangeable Head Attachments.
• Accuracy of +/- 2% of indicated value in both clockwise and counter clockwise directions.
• Broad accuracy range extends from 10% to 100% of Full Scale to help reduce the number of torque wrenches required.
• Ninety-nine "on-board" memory storage locations help improve efficiency when taking multiple torque readings.
• Three units of measure are available (Ft-lb, In-lb, and Nm).
• Three operating modes: Track Mode, Peak Hold and Auto Clear.
• Fast sampling rate helps maintain high accuracy during torque applications.
• Torque wrench head rotates to allow for easy viewing of LCD display.
• Easy to read LCD Display with large digits.
• 3-way Red/Green/Yellow lights.
• Yellow light appears at the low end of the zone.
• Green light appears and buzzer sounds when the target is reached.
• Red light appears with intermittent buzzer when it is over torqued.
• Audible buzzer helps identify when desired torque target zones are approaching and met.
• Target torque zone is adjustable from 1% to 10% of targeted torque value.
• Meets or exceeds ASME B107.28