|
Henchman |
|
|---|
Astro Single Position Head
Product Codes: ( / / / / / / / / )
Astro Single Position Turret Heads for M22520/1-01 / AF8 Crimp Tool
The DMC AF8, qualified to MIL-DTL-22520/1* and AS22520/1*, has virtually limitless application within the specified wire range of 12 through 26 AWG. Over a thousand turret heads are available to adapt the tool frame to your specific military or proprietary contact/wire combination. The 8 impression indent crimp, which is standard in the AF8, assures absolute maximum tensile strength with almost every closed barrel contact. Special indent configurations and gaging are available upon request.
For proper operation, the tool must be mated with one of the following optional accessories: a military standard or non-military turret head (TH-XXX Part No. Series), a military standard or non-military positioner (TP-XXX Part No. Series), or an adjustable head (Part No. UH2-5). This is done simply by orienting the head in the keyed position, and by tightening the hex socket screws provided as part of the head.
| Mil-Spec No. | Astro No. | DMC Equivalent |
|---|---|---|
| M22520/1-06 | 615713 | TP45 |
| M22520/1-07 | 615714 | TP85 |
| M22520/1-08 | 615715 | TH199S |
| M22520/1-09 | 615821 | TP360 |
| M22520/1-10 | 615822 | TP365 |
| M22520/1-11 | 616406 | TP465 |
| M22520/1-15 | 616410 | TP485 |
| M22520/1-16 | 620172 | TP513 |
| M22520/1-17 | 620537 | TP651 |
Specifications
- Milspec: M22520/1-06
- DMC Equivalent: TP45
Category: Positioners and Turrets
Brand: Astro Connector Tooling
Astro Single Position HeadProduct Code: ( M22520/1-06 / M22520/1-07 / M22520/1-08 / M22520/1-09 / M22520/1-10 / M22520/1-11 / M22520/1-15 / M22520/1-16 / M22520/1-17 ) Category: Connector and Cable Tooling / Positioners and Turrets
Brand: Astro Connector Tooling Weight: 0 Description:
Astro Single Position Turret Heads for M22520/1-01 / AF8 Crimp Tool The DMC AF8, qualified to MIL-DTL-22520/1* and AS22520/1*, has virtually limitless application within the specified wire range of 12 through 26 AWG. Over a thousand turret heads are available to adapt the tool frame to your specific military or proprietary contact/wire combination. The 8 impression indent crimp, which is standard in the AF8, assures absolute maximum tensile strength with almost every closed barrel contact. Special indent configurations and gaging are available upon request. For proper operation, the tool must be mated with one of the following optional accessories: a military standard or non-military turret head (TH-XXX Part No. Series), a military standard or non-military positioner (TP-XXX Part No. Series), or an adjustable head (Part No. UH2-5). This is done simply by orienting the head in the keyed position, and by tightening the hex socket screws provided as part of the head.
|
|
