Description:
This innovative device is ideal for network installers or technicians and will allow the user to easily check cable integrity or measure AC & DC voltage, current, resistance, and continuity etc. without needing to carry two separate devices. The unit will check for cable continuity, open-circuits, short-circuits, and cross-connects etc. A remote terminator is included and enables the user to check network cables at a wall jack or patch panel. Supplied with loop back cable, LAN terminator, and multimeter leads.
LAN tester specifications:
- LAN tester checks faults & miss wired conductors
- Manual or automatic testing
Specifications
| Continuity buzzer : true |
| AC Current Ranges : 2.0mA, 20.0mA, 200.0A |
| AC Current Accuracy : 2.0% |
| DC Current Ranges : 2.0mA, 20.0mA, 200.0mA |
| DC Current Accuracy : 1.5% |
| Resistance Ranges : 200.0?, 2.0k?, 20.0k?, 200.0k? |
| Resistance Accuracy : 0.8% |
| Measures in Celcius : false |
| Measures in Fahrenheit : false |
| Measures in Kelvin : false |
| AC Voltage Ranges : 200.0mV, 2.0V, 20.0V, 200.0V, 600.0V |
| AC Voltage Accuracy : 1.2% |
| DC Voltage Ranges : 200.0mV, 2.0V, 20.0V, 200.0V, 600.0V |
| DC Voltage Accuracy : 0.5% |
| Records Minimum : false |
| Records Maximum : true |
| Data Hold : true |
| Relative Measure : false |
| Display Type : LCD |
| DMM Control from PC : false |
| Safety Rating Cat : Cat III |
| Safety Rating Max Volt : 600.0V |
| Count / Maximum Reading : 3.0pc |
| True RMS : false |
| Autorange : true |
| Optical Sensor : false |
| Measures duty cycle : false |
| Measures dwell : false |
| Length : 162.0mm |
| Width : 74.5mm |
| Depth : 44.0mm |
| Probe Type : High Grade Meter Probes |
| Connection to meter : Shrouded 4mm Banana Plug |
| Meter Input Impedence : 10.0M? |
| Input Protection Fuse : 200.0mA |
| Measures diode : true |
|
|
