Stahlwille 730A 2 1 Manoskop Torque Wrench 17.5-87.5 in-lb

Product Highlights

• Wear Resistant: Wear resistant trigger system with a flexible rod. In contrast to conventional torque wrenches, it is not necessary to reset the wrench to zero after each job to unload the spring. In this way, users bene?t from long-term accuracy and safe measurement results with less time required.
• Fast: Rapid setting thanks to the easy-action locking lever in the handle. Ergonomically designed, non-slip adjuster with a thumb recess for fast, safe setting of the slider.
• Simple: Quick adjustment from outside, no disassembly of the torque wrench required, with two adjustment points for the maximum & minimum values.
• Protected: The internal mechanism is extremely resistant to mechanical wear and well protected against dirt and soiling inside the outer housing.
• Flexible Rod Principle: Mechanical torque wrenches from STAHLWILLE have a wear-resistant trigger system with a ˘exible rod. In contrast to conventional torque wrenches with spiral springs, the STAHLWILLE system eliminates one key work step: once the fastener has been tightened, it is not necessary to reset the wrench to »0«.

Features

Properties

• Click-type
• The measuring element is only under load while force is being applied, no need for manual reset to zero
• Mount for interchangeable insert/shell tools
• QuickRelease safety lock (sizes 5-65)
• Rapid setting thanks to easy-action locking lever in the handle (sizes 5-65)
• Ergonomically designed, non-slip adjuster with a thumb recess
• Magnifying glass integrated in the display window
• Optimised convex handle for strain-free working
• Dual stop signal
• Twin scales Nm/ft-lb and Nm/in-lb (sizes 5-80)
• On request also available as an Nm only version without twin scale (sizes 5-65)
• Can be applied for either clockwise or anticlockwise tightening by turning the inserts over
• Any force applied to the tool after the 'click' or applied in the opposite direction to the current function, e.g. forcible loosening of a jammed screw, does not act on the trigger mechanism and cannot cause damage to it
• Calibration using perfectControl calibrating unit No 7794 or calibration system No 7706. Readjustment does not require disassembly.
• Certificate in accordance with DIN EN ISO 6789-2:2017
• Display deviation value +/- 4%