Stahlwille 714/10 Manoskop Tightening Angle Torque Wrench 10-100 Nm

• Electromechanical triggering - The best of both worlds: electromechanical torque wrenches from STAHLWILLE combine the uncompromising accuracy of an electronic torque tool with the comforting tactile feedback of a mechanical trigger mechanism.
• Safe - Increased fastener quality, including the angle of turn as the second measured quantity makes the bolted joint even more secure. The QuickRelease interlock technology ensures tools cannot be inadvertently lost, while enabling rapid, safe tool changes.
• Audited - All our angle-controlled torque wrenches have a logging function. Using the corresponding software (this is an optional extra), it is possible to read out programmed, stored readings and archive them on the PC, for example by the serial number of the tool, date and timestamp of the tightening operation, target torque and angle and the torques and angles actually recorded.
• Economical - Thanks to the considerably extended measuring ranges, every angle-controlled torque wrench can replace as many as four mechanical torque wrenches (two indicating and two clicking), which simultaneously reduces the costs of maintenance, calibration and adjustment. All these models are suitable for clockwise and anticlockwise tightening.
• Made to measure - Four measuring modes (torque, angle, torque backed up by angle, angle backed up by torque).
• HD-Display - High-de?nition colour display providing a reading angle up to 170° and with additional side-mounted indicator lamps. Yellow lamp: advance warning threshold reached green lamp: within the target range red lamp: reading is outside the tolerance range.

Properties:

• 4 measuring modes (torque, angle of rotation, torque with control variable angle of rotation, angle of rotation with control variable torque)
• 3 function modes: triggering, peak hold (indicating operation with peak value display) and track (indicating operation with momentary value display)
• Micro-USB interface for quick connection to a PC
• QuickRelease safety lock - exchange system for insert.wkz.
• Data storage (= 2. 500 tightening operations)
• up to 200 tightening operations in a maximum of 25 sequence plans are programmable
• different tolerance limits can be set depending on the tightening operation
• acoustic and visual evaluation of the tightening operation, sensible and audible trigger signal
• quick and precise setting via keypad, no unintended adjustment by automatic key lock
• overload protection by acoustic and optical warning signal as well as forced release (right)
• automatic indication of the next calibration date according to time and/or number of loads
• fully automatic calibration and adjustment with the perfectControl® calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation)
• automatically correct tightening torque after entering a deviating stitch size
• immediately ready for operation again after unloading
• Right and left tightening - for left tightening in function mode triggering may be necessary. the insertion tool must be turned by 180°
• torque and angle of rotation visible at the same time
• measurement independent of the point of force application (Gr. 1, 2 and 4)
• safe handling due to ergonomically shaped handle (resistant to oils, greases, fuels, brake fluids and Skydrol)
• 3 certificates (torque indicating/releasing according to DIN EN ISO 6789-2:2017, angle of rotation)
• Supplied with SENSOMASTER 4 software, USB cable, 4 AAA/LR03 micro batteries, 1.5 V. Micro NiMH rechargeable batteries AAA, 1.2 V, can be used. Can optionally be equipped with Li-Ion battery 7195-2 and charger no. 7160.
• High-resolution colour graphic display with additional lateral signal lights