Stahlwille TORSIOTRONIC 6 Electromechanical Screwdriver 0.6-6 Nm

Stahlwille TORSIOTRONIC 6 Electromechanical Screwdriver 0.6-6 Nm - For over 160 years, we as a traditional German company from Wuppertal have stood for tools that are appreciated around the world for their excellent quality.

Technology and Features

• Fine Tooth Ratchet Mechanisms - Stahlwille fine tooth ratchets have a specially developed, perfectly balanced mechanism with 80 teeth, ensuring maximum load capacity and, at the same time, excellent durability. With Stahlwille fine tooth ratchets, no less than eight teeth engage at once, which provides smooth working action. The tight ratchet angleof only 4.5 degrees enables efficient working in confined spaces.

Unique

Ready When You Are

Clockwise or Anticlockwise

Safe

Intuitively Simple

Brilliant

Logging Function

Properties

• Display and triggering
• Integrated 80-tooth bit ratchet for a working angle of only 4.5 degrees for extremely fine work - ideal for hard-to-reach bolted joints
• After triggering, the sliding mechanism prevents unintended overshooting of the set tightening torque and overtightening of the screw
• Clear display of all relevant information on a bright, battery saving colour OLED display - readable from almost any angle
• Optical evaluation of the screw torque by traffic light colours on the display and side LEDs
• Display in various languages
• Long battery life with battery-saving standby mode. The batteries are quick and easy to change
• Stores up to 2500 screw joints and sequences for later reading and documenting on the PC via an integrated micro-USB interface
• Target torque and tolerances to evaluate the measured value can be set individually
• Short training time thanks to virtually self-explanatory controls and an easy-to-understand menu structure
• Three operating modes (click, track, peak hold)
• Optical, acoustic and haptic stop signals
• The ergonomically optimised ball grip allows for fatigue-free work and is resistant to oils, greases, fuels, brake fluids, and skydrol
• Left and right tightening
• With 1/4 inch inner square at the end of the handle (6.3 DIN 3120/ISO 1174-1) to accomodate a 1/4 inch cross-handle
• Units of measure: cNm, Nm, ft-lb, in-lb, in-oz
• Included in the scope of delivery: Software SENSOMASTER 4, USB cable, bit holder, T-handle (size 10)
• Supplied with 3.6V lithium battery, type 18650, packaged according to UN 3480
• Patented
• Certificate in accordance with DIN EN ISO 6789-2:2017
• In a sturdy plastic box
• Display deviation +/- 4%