JBC DDSE 2 Tool Rework Station 230V

JBC DDSE 2 Tool Rework Station 230V - The complete solution to rework circuits with medium power requirement.

Equipped with T245 General Purpose Handle and DR560 Desoldering Iron.

Its DDE 2-Tool Control Unit is capable of manage up to 2 tools simultaneously and fully compatible with 10 different JBC tools.

It provides the best rework quality thanks to JBC Most Efficient Soldering System and, additionally, the intelligent Sleep & Hibernation Modes help to extend life of tips.

Specifications:

• Peak power: 150 W per tool - 23.5 V
• Selectable temperature: 90 to 450 ºC / 190 to 840 ºF
• Vacuum: 75% / 570 mmHg / 22.4 inHg
• Flow rate: 9 SLPM
• Temperature accuracy: +-3%
• ESD safe: Meet ANSI/ESD S20.20-2021
• Equipotential bonding: Connection to EPA
• Tip-to-ground resistance: <2 ohms
• Tip-to-ground voltage: <2 mV RMS
• USB-A: Firmware update, Graphics and profiles
• USB-B: PC communications
• FAE / Robot connector: Remote control or FAE Fume Extractor connection
• WEIGHT AND DIMENSIONS:
• Control Unit: 232 x 148 x 120 mm / 8.67 kg
• 9.13 x 5.83 x 4.72 in / 19.11 lb
• Package: 525 x 318 x 347 mm / 12.40 kg
• 20.67 x 12.52 x 13.66 in / 27.34 lb

Contents:

• 1x 2-Tool Control Unit
• 1x MSE Electric Desoldering Module for DDE & DME
• 1x T245 General Purpose Handle (cartridge not included)
• 1x DR560 Desoldering Iron (C560003 already inserted)
• 1x ADS Stand for T210 & T245 Handles
• 1x DRS Stand for DR560 Desoldering Iron
• 1x SCH Cartridge Holder