|
Henchman |
|
|---|
Proto J6472 Electronic Torque Tester 25-250 in-lb 3/8 Inch Drive
Product Code: J6472
• Use to test all types of torque wrenches in all types of settings where full scale calibration is needed or where a quick Pass/Fail check is required.
• Accuracy of +/- 1% of indicated value in both clockwise and counter clockwise directions.
• Broad accuracy range extends from 10% to 100% of full scale.
• Three units of measure are available ft-lb, in-lb, and Nm.
• Three operating modes: Track Mode, Peak Hold and First Peak (for use with Click-style Torque wrenches).
• Fast sampling rate helps maintain high accuracy during torque applications.
• Each tester is built with a male square drive and also comes supplied with a female-to-female square drive adapter.
• Powered by a standard 9V battery, providing up to 50 hours run time.
• Testers meet or exceed requirements set forth in ASME B107.29
• NIST traceable calibration certificate supplied with each tester.
• Optional all-steel stand (J6470S) provides a strong support with minimal footprint.
• Proto Tools have been manufactured in the USA for over 110 years, made to standards suitable for stringent aerospace requirements and heavy mining applications.
Specifications
- Drive Size: 3/8 in
- Torque Range: 2.1-20.8 ft-lb / 25-250 in-lb
- Increments: 0.01 ft-lb / 0.10 in-lb
- Width: 6 in
- Height: 4-1/2 in
- Length: 6 in
- Weight: 6 lbs
- 662679005870
Category: Torque Checkers
Brand: Proto Tools
Proto J6472 Electronic Torque Tester 25-250 in-lb 3/8 Inch DriveProduct Code: J6472 Category: Torque Control and Testing / Torque Checkers
Price: $AUD 3164.61 (inc GST) Brand: Proto Tools Description:
• Use to test all types of torque wrenches in all types of settings where full scale calibration is needed or where a quick Pass/Fail check is required. • Accuracy of +/- 1% of indicated value in both clockwise and counter clockwise directions. • Broad accuracy range extends from 10% to 100% of full scale. • Three units of measure are available ft-lb, in-lb, and Nm. • Three operating modes: Track Mode, Peak Hold and First Peak (for use with Click-style Torque wrenches). • Fast sampling rate helps maintain high accuracy during torque applications. • Each tester is built with a male square drive and also comes supplied with a female-to-female square drive adapter. • Powered by a standard 9V battery, providing up to 50 hours run time. • Testers meet or exceed requirements set forth in ASME B107.29 • NIST traceable calibration certificate supplied with each tester. • Optional all-steel stand (J6470S) provides a strong support with minimal footprint. • Proto Tools have been manufactured in the USA for over 110 years, made to standards suitable for stringent aerospace requirements and heavy mining applications. |
|
