Stahlwille 730/4 Manoskop Torque Wrench with Insert Tool Carrier 8-40 Nm

• Wear-resistant - Wear resistant trigger system with a flexible rod. In contrast to conventional torque wrenches, it is not necessary to reset the wrench to zero after each job to unload the spring. In this way, users bene?t from longterm accuracy and safe measurement results with less time required.
• Fast - Rapid setting thanks to the easy-action locking lever in the handle. Ergonomically designed, non-slip adjuster with a thumb recess for fast, safe setting of the slider.
• Simple - Quick adjustment from outside, no disassembly of the torque wrench required, with two adjustment points for the maximum & minimum values.
• Protected - The internal mechanism is extremely resistant to mechanical wear and well protected against dirt and soiling inside the outer housing.
• Flexible rod principle - Mechanical torque wrenches from STAHLWILLE have a wear-resistant trigger system with a ˘exible rod. In contrast to conventional torque wrenches with spiral springs, the STAHLWILLE system eliminates one key work step: once the fastener has been tightened, it is not necessary to reset the wrench to 0.
• Compact - Compact and space-saving, the MANOSKOP® 730 Quick torque wrenches are available in sizes 2 and 4. They feature the same measuring and trigger technology as their "big brother", and are just as precise and reliable.

Properties

• click-type
• the measuring element is only under load while force is being applied, no need for manual reset to zero
• mount for interchangeable insert/shell tools
• QuickRelease safety lock (sizes 565)
• rapid setting thanks to easy-action locking lever in the handle (sizes 565)
• ergonomically designed, non-slip adjuster with a thumb recess
• magnifying glass integrated in the display window
• optimised convex handle for strain-free working
• dual stop signal
• twin scales Nm/ft.lb and N.m/in.lb (sizes 5-80)
• on request also available as an N·m-only version without twin scale (sizes 5-65)
• can be applied for either clockwise or anticlockwise tightening by turning the inserts over
• any force applied to the tool after the 'click' or applied in the opposite direction to the current function - e.g. forcible loosening of a jammed screw - does not act on the trigger
• mechanism and cannot cause damage to it
• calibration using perfectControl® calibrating unit No 7794 or calibration system No 7706. Readjustment does not require disassembly.
• certificate in accordance with DIN EN ISO 6789-2:2017
• display deviation value ± 4%